Supplier Radar Level Meter Level Transmitter Measure Grain with 4-20mA Modbus

• Customization: Available
• Measurement Accuracy: ±5mm
• Kind: Radar
• Model NO.: ATRD
• Structure: All in One
• Warranty: 1 Year
• Certification: CE
• Material: SS304
• Process Temperature: -40~120℃
• Application: Liquid or Solid
• Protocol: Hart/RS485
• Output Signal: 4-20mA
• Power Supply: 24VDC/220VAC
• Display: Yes
• Signal Output: RS485 / Modbus Protocol
• Precision: ± 3mm
• Transport Package: Carton or as Your Required
• Origin: Yantai
• HS Code: 9026100000
• Production Capacity: 5000PC/Momth

Product Description

Radar level meter level transmitter measure grain with 4-20mA MODBUS

Product Description

26GHz high frequency Radar Level  Meter

Introduction

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 80 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.The characteristics of 26G radar level meter:

Ø easy to install; Non-contact radar, no wear, no pollution.

Ø Almost no corrosion, bubble effect

ØSerious dust environment is ok.

Ø A shorter wavelength, the reflection of solid surface inclination is better.

Ø The measuring range is smaller, for a measurement will yield good results.

Ø High signal-to-noise ratio, the level fluctuation state can obtain better performance.

Ø High frequency, measurement of solid and low dielectric constant of the best choice.

Model selection

Model ATRD- 901/ 902/ 903 / 904/ 905/ 906

P            Standard (Non-explosion-proof)

I              Intrinsically safe (Exia IIC T6 Ga)

G            Intrinsically safe type, Flameproof (Exd (ia) IIC T6 Gb)

Process Connection / material

G           Thread stainless steel 304

N            Thread stainless steel  304

A             Flange stainless steel   304

B             Flange stainless steel Universal joint Nickel plated carbon steel

C            DN100 / PP / 304 / /  Flange stainless steel Universal joint Nickel plated carbon steel

D            DN125 / PP / 304 / /  Flange stainless steel Universal joint Nickel plated carbon steel

E            DN150 / PP / 304 / /  Flange stainless steel Universal joint Nickel plated carbon steel

H            DN250 / PP / 304 / /  Flange stainless steel Universal joint Nickel plated carbon steel

Y            Special customization

Antenna type / material

A          Horn antenna Φ46mm/stainless steel 304

B          Horn antenna Φ76mm/stainless steel 304

C          Horn antenna Φ96mm/stainless steel 304

D          Horn antenna Φ121mm/stainless steel 304

E          Parabolic antenna  Φ196mm/stainless steel 304

F          Parabolic antenna  Φ242mm/stainless steel 304  

G          Special customization

Seal / Process Temperature

V          Viton/(-40~150) ºC

K          Kalrez/(-40~250) ºC

Output

2        (4~20)mA/24V DC 2 wire

3        (4~20)mA/24V DC/HART 2 wire

4        (4~20)mA/220V AC/ 4 wire

5          RS485/Modbus

Shell / Protection Class

L          Aluminum /IP67

Q         Stainless steel 316L/IP67

Cable Entry

M         M20 x l. 5

N         ½ ″NPT

Display Programming

V         With

X         Without

Detailed Photos

Applications

 

Company Profile

Auto Instrument Making Co., Ltd has been committed to crafting high-end equipment since 1994. Specifically, we focus on manufacturing
measures and process control instruments in the industrial pressure measurement, which pursues to be the cherry on top by adhering
to the accumulated craftsmanship. Our main products include differential pressure transmitters, pressure transmitters, capacitive pressure sensors, electromagnetic flow meters, vortex flow meters, and radar level which are widely used in the industries of electrical power, petroleum, metallurgy, medicine, food, brewing, textile, building material, etc..

As a source manufacturer, we are capable of modifying or remolding the core production equipment to satisfy the specified product features.
The concepts of modification works apply to several annual rings, including welding systems, pressure calibration systems, diaphragm coating systems, and so on.

FAQ

1. Q: Are you a manufacturer or trading company?

    A: We are the manufacturer for pressure, flow and level transmitters since 1994. 
 
2. Q: What's your quality control system?
    A: As an ISO9001:2008 certificated manufacturer, we have a strict quality control system, and each product is done with fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
 
3. Q: Is there MOQ with your product?
    A: We have no MOQ limits, 1pc for testing is acceptable.
 
4. Q: Do you provide customized products?
    A: Yes, we can print your logo on our products; OEM, ODM & customization are welcome.
 
5. Q: What is the warranty of your products? And after-sales service?
    A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
 
6. Q: What is the lead time of your product?
    A: We are a factory, our lead time is always within 10~15 working days for products without customization, but lead-time will vary based on different products. You can check detailed lead-time with our sales.

7. Q: What international certificates do you have for your products?
    A: We have CE, RoHS, SIL,IOS, ATEX.