| Customization: | Available |
|---|---|
| Type: | Level Transmitter |
| Structure Type: | Capacitive Pressure Transmitter |
|
Still deciding? Get samples of US$ 260/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2'' flange 3051 hart flange type 4~20ma water level transmitter pricesensor with low cost
Introduction
Flange level transmitter is used to measure level and density of liquids with solid and sediment,then convert into 4-20 mA current signal output.available to connect with Hart Protocol for data monitor andcontrol.
diaphragm pressure transmitter widely used in petroleum,chemical,metallurgy,electric power,food,paper, pharmaceutical, machinery,manufacturing and other industries.
Features
Specification:
| Operating Type | SMART, 2 wire |
| Range | 0-21~210kgf/cm2 |
| Display | LCD with Engineering Units |
| Zero Span Adjust | YES |
| Over Range Protection | 2 Times Max. Pressure |
| Square root Extraction | YES |
| Accuracy | ±0.1% |
| Stability | ± 0.125% of URL |
| Ingress Protection | IP65/IP68 |
| Power Supply | 24 VDC (Loop Powered) |
| Output Signal | 4-20Ma, HART |
| Elec. Connection | 2 Nos. 1/2" NPT(F) |
| Material of Element | SS316 |
| Material of Body | SS316 |
| Material of Housing | Die cast Alu. Epoxy Coating |
| Material of Wetted Part | SS316 |
| Material of Flange | SS316 |
| Flange Type | DN50 2" #150 Lb,DN80 DN100 |
Order sheet:
| Item | Code | Specification |
| AT3051LT | Smart Level Transmitter | |
| Measurement Range | 3 | 0-4~7.5 Kpa |
| 4 | 0~37.4 Kpa | |
| 5 | 0~186.8 Kpa | |
| 6 | 0~690 Kpa | |
| 7 | 0~2068 Kpa | |
| Output | S | 4-20mA, HART Protocol, Linear output |
| Sensor Diaphragm Material / Fill Fluid |
2 | Stainless Steel 316L Silicone Oil |
| 3 | Hastelloy C Silicone Oil | |
| A | Stainless Steel 316L Fluorine oil | |
| Drain hole | B | Back of process flange or none |
| U | Process flange side upper | |
| L | Process flange side lower | |
| Wetted O-ring Material | 7 | Buna-N (NBR) |
| 6 | Viton (FKM) (Temperature ≥-20ºC) | |
| 5 | Low Temperature Viton (FKM-GFLT) | |
| Cable Entry | 1 | M20*1.5 |
| Process Connection | C | 2'' ANSI 150# |
| D | 2'' ANSI 300# | |
| J | 2'' ANSI 600# | |
| E | 3'' ANSI 150# | |
| F | 3'' ANSI 300# | |
| K | 3'' ANSI 600# | |
| G | 4'' ANSI 150# | |
| H | 4'' ANSI 300# | |
| Q | DN50 PN1.6MPa/4Mpa | |
| R | DN50 PN6.4Mpa | |
| M | DN50 PN10Mpa | |
| S | DN80 PN1.6MPa/4Mpa | |
| T | DN80 PN6.4Mpa | |
| N | DN80 PN10Mpa | |
| U | DN100 PN1.6MPa/4Mpa | |
| W | DN100 PN6.4Mpa | |
| Flange Diaphragm Material | A | Stainless steel 316L |
| B | Hastelloy C | |
| C | Tantalum | |
| E | PFA coating | |
| F | F46 coating | |
| G | Gold-plated | |
| Insert Tube Length | 0 | 0 |
| 1 | 50mm | |
| 2 | 100mm | |
| 3 | 150mm | |
| Fill Fluid(High pressure side) | A | Silicone Oil |
| C | Fluorine oil | |
| Optional | d | Intrinsically safe type, Flameproof (Exd IIC T4~T6) |
| i | Intrinsically safe (Exia IIC T4~T6) | |
| M3 | LCD display | |
| D1 | Stainless steel drain valve or screw (2pcs) | |
| C1 | 1/2'' NPT female waist flange (2sets) | |
| C12 | 1/2'' NPT-M20*1.5-Φ14 pressure pipe (2sets) | |
| C2 | M20*1.5 male thread T joint (2sets) | |
| C21 | M20*1.5 T joint -Φ14 pressure pipe (2sets) | |
| K1 | Degreasing treatment | |
Auto Instrument Making Co., Ltd has been committed to crafting high-end equipment since 1994. Specifically, we focus on manufacturing
measures and process control instruments in the industrial pressure measurement, which pursues to be the cherry on top by adhering
to the accumulated craftsmanship. Our main products include differential pressure transmitters, pressure transmitters, capacitive pressure sensors, electromagnetic flow meters, vortex flow meters, and radar level which are widely used in the industries of electrical power, petroleum, metallurgy, medicine, food, brewing, textile, building material, etc..
As a source manufacturer, we are capable of modifying or remolding the core production equipment to satisfy the specified product features.
The concepts of modification works apply to several annual rings, including welding systems, pressure calibration systems, diaphragm coating systems, and so on.
1. Q: Are you a manufacturer or trading company?
A: We are the manufacturer for pressure, flow and level transmitters since 1994.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have a strict quality control system, and each product is done with fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcome.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is the lead time of your product?
A: We are a factory, our lead time is always within 10~15 working days for products without customization, but lead-time will vary based on different products. You can check detailed lead-time with our sales.
7. Q: What international certificates do you have for your products?
A: We have CE, RoHS, SIL,IOS, ATEX.
){kind=link}